Retek Motion Co., Limited
Concentrate on one-stop solutions
Add to Cart
60mm Dia Small Synchronous Motor , Reversible Synchronous Motor Low Noise Level 45dB
60mm OD advertising machine motor, shaft extension from centre cap
Typical Application:
Advertising Machine Motor, Automated Device Lifter, Laboratory Analyzer Lifter,Mahjong Machine,
Features:Low Noise
Technical Parameters :
| Voltage | Frequency | Input Power | Input Current | Starting Voltage | Temperature Rise | Noise Level | Rotation Direction | Dimension |
| (V) | (Hz) | (W) | (mA) | (V) | (K) | (dB) | D×H mm | |
| 100-120 | 50/60 | ≤14 | ≤110 | (100-120)±15% | ≤60 | ≤45 | cw/ccw | 60×60 |
| 220-240 | 50/60 | ≤14 | ≤55 | (220-240)±15% | ≤60 | ≤45 | cw/ccw | 60×60 |
Torque and Speed:
| Rated speed (rpm) | 2.5/3 | 3.8/4.5 | 5/6 | 7.5/9 | 10/12 | 12/15 | 15/18 | 20/24 | 25/30 | 30/36 | 40/48 | 50/60 | 60/72 | 80/96 | 110/132 |
| Normal torque(kgf.cm) | 45/38 | 32/27 | 26/21.5 | 20/17 | 12/15 | 13.5/11 | 10/8.3 | 7.5/6 | 6.5/5.3 | 5/4.2 | 4/3.3 | 3/2.5 | 2.5/2 | 2/1.7 | 1.4/1.2 |
| Higher torque(kgf.cm) | 60/50 | 50/40 | 40/34 | 25/21 | 20/17 | 18/15 | 14/11.5 | 10/8.3 | 8.5/7.2 | 7.5/6 | 6/5 | 4/3.3 | 3.5/3 | 2.5/2 | 2/1.6 |
| Highest torque(kgf.cm) | 80/65 | 60/50 | 50/40 | 30/25 | 30/25 | 26/21.5 | 21/18 | 15/12.5 | 12/10 | 10/8.5 | 8/6.5 | 6/5 | 5/4.2 | 3.5/3 | 3/2.5 |
Drawing :
FAQ
1. What are your prices?
Our prices are subject to specification depending on technical requirements. We will make offer we clearly understand your working condition and technical requirements.
2.Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum order quantity. Normally 1000PCS, however we also accept the custom made order with smaller quantity with higher expense.
3.Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.
4.What is the average lead time?
For samples, the lead time is about 14 days. For mass production, the lead time is 30~45 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases